Featured Post

2026 Shows in the Pacific Northwest

Details are current as of April 29, 2026. If you know of any shows not listed here or spot any errors in the listings, please leave a note i...

Friday, December 2, 2011

Are HPA Fees On The Way?

Here we go again!

The Washington Department of Fish and Wildlife (WDFW) has, through the offices of Representatives Zack Hudgins and Ross Hunter, introduced HB 2135, a bill which, if passed and signed into law, would allow WDFW to "charge  a  one  hundred  fifty  dollar application  fee  for  all  applications  for  hydraulic  project  permits under  this  chapter  to  recover  the  costs  for  processing  permit applications."

Needless to say, since the recently approved beach mining requires an HPA, it would cost $150 just to apply to go gold panning at the ocean if this bill is enacted, making the activity prohibitively expensive.  Can you say, "Hard won, easily lost?"

Please feel free to use the links above to contact Representatives Hudgins and Hunter, if you are so inclined, and to read the text of the bill and follow its progress in the legislature.  At the moment, the bill is in the House Ways & Means Committee.

Sunday, October 30, 2011

Who's Watching Us?

Ever since the South West Oregon Mining Association (SWOMA) published this article on their website detailing the variety of state and federal agencies that are monitoring their online activities, I've been wondering who's watching WSM?

I don't normally concern myself with the demographics of visitors to this site, although perhaps I should. Anyway, I decided to check on who's been dropping by lately.  Among our visitors in the last 2 weeks:

Washington State DNR - 1 visit

Click to enlarge.
















Headquarters United States Army Information Systems Command - 6 visits

Click to enlarge.















Federal Aviation Administration - 5 visits

Click to enlarge.
















BLM - 4 visits

Click to enlarge.
















Department Of Homeland Security - 1 visit

Click to enlarge.
















WDFW - 4 visits

Click to enlarge.
















State Of New Mexico - 1 visit

Click to enlarge.

















Visits by some of these agencies, like DNR, BLM, and WDFW, I can understand.  But the Army?  The FAA?  (Seen any airborne suction dredges lately?)  And the Department of Homeland Security?  (YIKES!  This is getting scary!)

Hopefully I haven't frightened away too many of my readers.  Because maybe these are just visits by folks interested in getting out into the great outdoors and panning a few flakes of our favorite yellow metal?  We can hope so, anyway.

Tuesday, October 25, 2011

Mining Districts: The Old Becomes New Again

Mining districts once constituted a bulwark for the organized protection of miners' rights.  After reading the ICMJ's Prospecting and Mining Journal article linked here, it appears they are poised to do so once again.  As the article above tells it, miners in southwestern Oregon have revived the late 19th-early 20th century institution of the mining district in order to more effectively organize their resistance to the increasing attacks coming from federal, state, environmentalist, and tribal sources.  Instrumental in this revival is the South West Oregon Mining Association (SWOMA).

According to the SWOMA website, the Jefferson Mining District was officially created on September 2, 2011 (see document and map here) following several meetings and a vote by the miners.  A couple of the assaults on miners' rights prompting the creation of the District include illegal road closures and the potential sealing of "inactive mines" (defined as "ANY mine without an approved Plan of Operations") as though they were abandoned mine lands.

Mining districts were common in Washington in the early 20th Century as shown in this 1912 map from Bulletin 507, The Mining Districts of the Western United States by James M. Hill:

Washington State Mining Districts in 1912 (Click to enlarge.)


As illustrated above, there were some 59 mining districts in Washington in those days.  Could they be revived?  And would doing so benefit local miners?  Given the recent activity in southwestern Oregon, the answers to both questions would seem to be, "yes!"  What can work in Oregon can work in Washington.  In particular, the SWOMA website linked above contains ample information for anyone wanting a "blueprint" of how to form a mining district.

Washington miners should take heed of this opportunity rather than remain complacent in the face of increasing threats to their occupation, for what government and environmentalists have done to miners in Oregon (and elsewhere) they can do to miners anywhere, including Washington.

The SWOMA website is linked both in this post and in the right-hand sidebar of this page under "Clubs and Organizations" for those interested in researching the formation of a mining district.

Thursday, October 20, 2011

PLSS And USGS Quadrangle Data In Google Earth

PLSS (Public Land Survey System) and USGS Quadrangle locations are now available in Google Earth with free plug-ins courtesy of Metzger+Willard, Inc.

If you've ever needed to know the section, township, and range in which a certain geographical feature is located, you can now see this information as an overlay in Google Earth thanks to the PLSGE plug-in described on this page which also contains the download link.

Likewise, if you need to know which USGS Quadrangle map covers your area of interest, download and install the QUADS plug-in described on this page where you will also find the download link.

Metzger+Willard also have other free Google Earth plug-ins listed on their Earth Survey page.  But the two mentioned above appeared to me to be the most useful for prospectors and miners.  Links for both plug-ins are also available in the MAPPING APPLICATIONS & ONLINE SPATIAL DATA section of the Resources for Prospectors portion of the right-hand sidebar on this page.

Friday, October 7, 2011

Ocean Beach Mining Opens Sunday

As reported here, ocean beach mining opens Sunday, October 9, for small-scale placer operations.  Remember, you need an individual HPA in hand before you can placer mine on the beaches as the Gold and Fish Pamphlet does NOT fulfill this requirement.  (Why miners need an HPA to dig holes in the sand but clam harvesters and sand castle architects do not is beyond me.)

The areas open to mining are in the Seashore Conservation Area which is defined in RCW 79A.05.605 as

...all lands now or hereafter under state ownership or control lying between Cape Disappointment and Leadbetter Point; between Toke Point and the South jetty on Point Chehalis; and between Damon Point and the Makah Indian Reservation and occupying the area between the line of ordinary high tide and the line of extreme low tide, as these lines now are or may hereafter be located, and, where applicable, between the Seashore Conservation Line, as established by survey of the Washington state parks and recreation commission and the line of extreme low tide, as these lines now are or may hereafter be located; and shall also include all state-owned nontrust accreted lands along the ocean: PROVIDED, That no such conservation area shall include any lands within the established boundaries of any Indian reservation.

Precisely where these "lands now or hereafter under state ownership or control" which are open to mining lie is unknown to this writer and may take some research in the property records of Clallam, Grey's Harbor, Jefferson, and Pacific counties to determine.  I have heard that the Washington Department of Fish and Wildlife (WDFW) has a map or maps showing which areas are open to mining but this writer has yet to locate a copy.  In any event, here is a map taken from Handbook For Gold Prospectors In Washington by Wayne S. Moen and Marshall T. Huntting, Information Circular 57, Washington Department of Natural Resources, Division of Geology and Earth Resources, 1975, page 36, showing where gold was found in beach deposits in the past.  (NOTE:  The locations shown below are for historical information only and are NOT necessarily open for prospecting under the new rules.  Check the appropriate land ownership or WDFW map records - if they exist - before mining.)

Historical Beach Placer Locations (Click to enlarge.)


The following placers numbered on the map above are described in Information Circular 57:

1 - Shi Shi Beach:  Beach between Portage Head and Point of Arches in Sections 18, 19, and 30 Township 32N Range 15W.  Beach deposit in which a thin layer of fine heavy sand rests on a wave-cut terrace in sandstone overlain by 1 to 3 feet of gravel and sand.  Gold and platinum are found in the thin layer and in cracks in the bedrock.

2 - Ozette Beach:  Section 12 Township 31N Range 16W.  Beach deposit of gold and platinum concentrated along surface of a wave-cut terrace in sandstone.

3 - Little Wink:  Center S½SW¼ Section 1 Township 30N Range 16W.  Reworked Pleistocene gravels in a beach placer.

4 - Morgan:  NW¼NW¼NE¼ Section 12 Township 30N Range 16W.  Reworked Pleistocene gravels at high-tide level.

5 - Morrow:  SW¼SW¼ Section 18 Township 30N Range 15W.  Beach deposit in which there is a 2-foot layer of gravel reworked by wave action from Pleistocene gravel.  Spotty fine gold content averaged $4.00 per cubic yard at $20 gold.

6 - Yellow Banks:  2 miles south of Sand Point in SW¼ Section 18 Township 30N Range 15W.  Beach deposit of gold and platinum concentrated on surface of a wave-cut terrace in Pleistocene drift.

7 - Main and Bartnes:  NW¼NW¼ Section 19 Township 30N Range 15W.  Sand and gravel cemented by clay and iron oxide.

8 - Johnson Point:  NW¼ Section 5 Township 28N Range 15W.  Beach placers and gold in Pleistocene deposits of the bench adjacent.  Some pans of sand ran as high as 60 cents Au and some panners recovered $2 to $10 per day at $20 gold.

9 - Cedar Creek:  Near mouth of Cedar Creek in E½ Section 18 Township 29N Range 15W.  Gold and platinum occur in a beach placer in a 2- to 15-inch sand layer on the surface of a wave-cut beach in clay.  The sand layer is said to be 400 feet long and 100 feet wide at low tide.  Said to yield from 2 to 5 pennyweights of gold and platinum per cubic yard.  Ratio of Pt to Au ranges from 1:5 to 1:15.

10 - Sunset Creek:  Section 19 Township 29N Range 15W.

11 - Ruby Beach:  E½NE¼ Section 31 Township 26N Range 13W.  On tombolo (a sand bar connecting an island to the mainland or to another island) between Abbey Island and Ruby Beach.  Very fine grained gold in beach sand.

12 - Moclips River:  Section 8 Township 20N Range 12W.

13 - Oyhut:  On ocean beach at Oyhut.  Beach placer. Assays 72 cents gold per ton at $20 gold.

14 - Point Brown:  Sections 15 and 23 Township17N Range 12W.

15 - Ocean Park:  Ocean beach at Ocean Park.  87 cents gold per ton at $20 gold.

16 - Fort Canby:  Mouth of Columbia River near Fort Canby.  Sand.  81 cents gold per ton at $20 gold.

17 - Sand Island:  Island at mouth of Columbia River just south of Ilwaco.  Sand.  $1.51 gold per ton at $20 gold.

See Information Circular 57 at the link above for more details.

Wednesday, September 28, 2011

Beach Mining Rules Effective October 9 -- HPA REQUIRED!

The new beach mining rules adopted by the Washington State Parks and Recreation Commission on August 11 will take effect on Sunday, October 9, 2011, according to the Southwest Region Office.

Remember: WDFW still requires you to obtain a separate HPA for beach mining activities conducted under the new WAC rules as the Gold and Fish Pamphlet does not apply to the ocean beaches. From the relevant WDFW webpage:

Washington State Parks and Recreation Commission has adopted rules that allow prospecting on ocean beaches. Because that agency adopted their own rules about beach prospecting, I don't need a permit from Washington Department of Fish and Wildlife, do I? Yes. The rules adopted by the Washington State Parks and Recreation Commission allowing certain beach prospecting activities are in addition to WDFW's permitting requirements. Because prospecting in marine waters is not covered by the Gold and Fish pamphlet, you must apply for, and be issued, an individual HPA to legally prospect on ocean beaches.

If you are planning on doing any beach prospecting this fall, you should apply for your HPA as soon as possible as some time is involved in WDFW issuing these permits.  The necessary application and instructions are available online at http://www.epermitting.org/.

Thursday, September 8, 2011

Make Your Own Black Sand Magnet

You can make your own black sand magnet for aiding in gold recovery using a plastic 35mm film cassette can, a piece of wire, and a magnet that will fit inside the film can.

To make mine, I used a small but powerful magnet I had in my junk box. Although it has a convenient loop at one end for attaching the wire, you may need to get a bit creative if your magnet has a different design. I drilled a hole in the bottom of the film can just large enough for the wire to pass through. The parts ready for assembly are shown below:
















(Note: I recommend drilling the hole in the cap instead of in the bottom of the film can as with the latter arrangement very fine particles of black sand work their way under the cap and onto the magnet itself.)

With the wire pushed through the drilled hole in the film can, form a loop in it as shown below so that the magnet can be raised and lowered inside the can:
















Attach the cap to the can to complete the assembly as shown below:
















To use your new magnet, spread your black-sand-containing concentrate more-or-less evenly over the bottom of a gold pan under an inch or so of water. Keep the magnet above the concentrate while moving it in a circular motion. If you get the magnet too low or into the sand, the magnetic particles will clump and can entrap pieces of gold. As you work, you will notice the concentrate becoming lighter in color in the areas where the magnetic black sand particles have been removed.
















Every few moments, withdraw the magnet from the concentrate pan. You will notice an accumulation of black sand on the bottom of the film container.
















Next, position the magnet in the water in a second gold pan which will serve to collect the magnetic sand removed from the concentrate pan. Release the black sand into the pan by pulling up on the wire to raise the magnet inside the film can.
















Each time you drop a load of black sand into the second gold pan, you should check it to be sure no gold particles were trapped within it. When you are satisfied that you have only black sand in the pan, you can dispose of that material as you normally do with your tailings. The second pan should now be empty (except for the water) and ready to receive the next load of black sand.

When you are no longer getting black sand on the magnet assembly from your concentrate pan, you are finished with this stage of the separation process. You will probably notice a considerable reduction in the amount of concentrate remaining in your pan, depending on how much magnetic black sand it contained, and may even see some gold pieces amid the remaining material, as on the right and bottom of the image below:
















As always, happy prospecting!

Friday, September 2, 2011

New Publications From WDGER

The Washington Division of Geology and Earth Resources has announced the following publications:

Information Circular 112.  Inactive and abandoned mine lands--Ruby Hill Mining District, Okanogan County, Washington, by F. E. Wolff, D. T. McKay, and D. K. Norman. 2011. 35 p. (Available online only, at http://www.dnr.wa.gov/Publications/ger_ic112_iaml_ruby_hill.pdf [59.8 MB])

Also, please be aware of corrections to the following publication:


Open File Report 2010-3 [revised 2011].  Geologic map of the Skokomish Valley and Union 7.5-minute quadrangles, Mason County, Washington, by Michael Polenz, J. L. Czajkowski, Gabriel Legorreta Paulin, T. A. Contreras, B. A. Miller, M. E. Martin, T. J. Walsh, R. L. Logan, R. J. Carson, C. N. Johnson, R. H. Skov, S. A. Mahan, and C. R. Cohan. 2010 [revised 2011]. 42 x 36 in. color sheet, scale 1:24,000, with 21 p. text. (Available online only, at
http://www.dnr.wa.gov/Publications/ger_ofr2010-3_geol_map_skokomish_valley_union_24k.zip [38.2 MB])

Errata for Open File Report 2010-3:  The name of Holocene ‘alluvium’ (units Qa(m) and Qo(am)) was changed to ‘marine deltaic alluvium’ to distinguish it from unit Qa. The unit labels and colors of units Qoa (Holocene to latest Pleistocene alluvium) and Qao (uppermost Olympic-source recessional outwash) were inadvertently switched on the map legend. This has been corrected. Kasper van Wijk has been added as fourth author to Lamb (2009). Corrections were made to the online file on August 8, 2011.

Monday, August 22, 2011

Beach Mining Rules Available

As reported here, the Washington State Parks and Recreation Commission approved small-scale prospecting and placer mining in the Seashore Conservation Area on Washington's ocean beaches at their meeting in Wenatchee on August 11.

Washington State Miner has just received from Parks and Recreation a copy of the rules as passed by the Commission at that meeting.  The text of the rules may be accessed as a .pdf file at the link here.

According to the source at Parks and Recreation, they do not yet have an exact date when the rules will go into effect but state it should be in mid- to late-September.

More information as it becomes available.

Friday, August 19, 2011

Beach Mining Approved by Parks and Recreation Commission

On August 11 in Wenatchee the Washington State Parks and Recreation Commission voted to approve small-scale prospecting and placer mining on ocean beaches in the Seashore Conservation Area.

The rules, which are yet to be posted on the Chapter 352-37 WAC site, are reported to go into effect about the middle of September.  When published, the new mining rules will be designated WAC 352-37-340 and may be located at the link above.

Washington State Miner will continue to monitor the WAC site and report when the rules are posted.



Saturday, June 25, 2011

Important MineCache Update

An important update regarding the MineCache plug-in for Google Earth (see the previous post here) is that selecting "BLM Mine Claim Records" for either active or closed claims now retrieves data directly from the BLM's LR2000 system instead of from the GeoCommunicator system as previously. This means that MineCache now has access to nearly 3.4 million claim records instead of the 1.6 million available through GeoCommunicator. The names of the claims appear in yellow boxes outlining the sections or fractions thereof in which the claims are located. As before, clicking on a claim's name opens an information window from which you may access the complete LR2000 report.

Beach Mining Rules Being Developed

The latest word on soon-to-be-allowed small scale beach mining (mentioned previously here, here, here, here, and here) is that State Parks is working on a draft of the rules and will hold a rule-making hearing on this subject at the Parks Commission meeting in Wenatchee on August 11th.

In the meantime, a draft of the proposed rules can be downloaded as a .pdf file from the link here.